Bluetooth setup on Linux

From IPRE Wiki

Jump to: navigation, search
  • Warning - you need to be root to edit the rfcomm.conf file.

If you have a fairly modern Linux setup, then you need only do the following. If you need to manually add and configure Bluetooth, see the notes here: http://pyrorobotics.org/?page=Using_20the_20Hemisson_20Robot

First, find out the Bluetooth address of your IPRE fluke device. To do this, as root, enter hcitool scan like so: 

% hcitool scan
Scanning ...
       00:0A:94:02:9E:0C       rochester-0 
       0F:22:13:48:45:0A       Pams Laptop
       00:11:22:33:44:43       IPRE6-19324

Then, add an entry in /etc/bluetooth/rfcomm.conf file using that Bluetooth address: 

rfcomm0 {
       # Automatically bind the device at startup
       bind yes;
       # Bluetooth address of the device
       device 11:22:33:44:55:66;
       #BorgDongle
       # RFCOMM channel for the connection
       channel	1;
       # Description of the connection
       comment "IPRE Scribbler Dongle";
}

Lastly, run rfcomm bind all like so: 

% rfcomm bind all

You can then refer to your Scribbler via the comport named "/dev/rfcomm0" in the init() function call.

If you are getting "Permission Denied" error messages when attempting to access the bluetooth serial port, you may need to set up the default permissions on your rfcomm devices following these directions by Henry Walker.

[edit]

Ubuntu 8.10 detailed instructions

Andrea Castellani has provided the following detailed instructions for setting up Myro on Ubuntu verson 8.10. Media:Myro_setup_LINUX_Ubuntu.txt

Retrieved from "http://www.pyjamaproject.org/Bluetooth_setup_on_Linux"
Personal tools